Product description:
We provide on site filtration service for all types of Hydraulic, Turbine, Lube oils. We remove physical contamination as well as moisture from oil ,so that you can use oil for longer period. It also reduces waste cost of replacement and causes no damage to the environment. We as a responsible service provider
can help you reduce your expenditures on fluids by upto 50%, which in turn helps you save a lot of
money. We are recognized as a most advanced providers of online offline Hydraulic Oil Filtration Services . Contamination control is a very important element for any Hydraulic system. We provide the latest technology to remove water and contaminants in national aerospace and iso standards from Hydraulic oil, Turbine oil, transmission oil, lubricating oil, cutting oil, gear oil, honing oil, quenching oil or any industrial oil in that matter . We have our presence in all the states and are capable to solve any Hydraulic oil contamination issues on foot thumbing notice . with our multilevel filtration technology our filtration services are considered a pioneer compared to other traditional or normal filtration methods, These services are rendered at extremely feasible rates. online oil testing services are carried out free of cost to our customers.
Every Hydraulic, Turbine, Gear component has an ISO 4406:99 tolerance and below such limits the system enters in the life extension spectrum.
Certainly an ISO 15/13/10 should be the normal cleanliness and going below will be an aerospace level, but being above will deteriorate the components and oil.
The best oil life extension is the one that primary covers the components life because this brings the highest benefits to the final user.
Wear and tear of Hydraulic, Turbine, Gear system components are directly related to the existence of contamination within the system. Metal particles within Hydraulic fluids accelerate the degradation of system components. Hydraulic,Turbine, Gear oil filtration effectively removes these particulates, helping maintain the purity of Hydraulic, Turbine, Gear fluids on a continuous basis. The performance of industrial filtration systems can be gauged by their efficiency to remove contamination and their capacity to hold dirt and keep particles from mixing in with the fluid.
Reduce machine downtime with oil purification
LOGRO Oil Filters continuously remove particles, water, acidity and oil degradation products from all kinds of oils and fluids, including hydraulic oil, lube oil, gear oil, engine lube oil, marine diesel oil (MDO), marine gas oil (MGO), heat transfer oil, honing oil, quenching oil, rolling oil, washing oil, synthetic gear oil, turbine lubrication oil, phosphate ester oil, on-load tap changer oil, water-glycol and even biodegradable oil and environmentally acceptable lubricants (EAL). This reduces oil and energy consumption and machine downtime.
Your benefits with LOGRO Offline Oil Filtration systems:
- Free online testing of NAS and ISO standards.
- Filtration in national aerospace standard class and equivalent ISO standard for super clean oils
- Dehydration of water from oil
- Removal of ferrous, non-ferrous particles
- Removal of suspended particles like dirt dust carbon etc from oil
- Removal of varnish from oil.
- Multistage filtration for fast and high grade filtration
- Moisture dehydration and filtration combine units.
- Reduced wear and failure of components
- Increased oil and component lifetime
- Longer lifetime of in-line filters
- Reduced power consumption
- Fewer unplanned breakdowns
- Reduced oil maintenance costs
- Lower environmental impact
FEATURES:
1.The oil cleaner uses machine power without need of other additional power.
2.Light weight, compact construction, convenient installation and requires only small installation space..
3.Employs specially designed throttle valve for maximum stability of oil flow, which assures superior filtration accuracy and efficiency(accuracy up to class NAS 6-9).
4.Suitable for all hydraulic machines with pressure range 10-210kgf/cm2.
5.Easy to maintain.
ISO Cleanliness Guidelines for Hydraulic, Turbine, Quenching & Lube Oils.
What is Cleanliness?
When we speak in terms of cleanliness, we often refer to the ISO particle count of the oil. According to the ISO 4406 standard, the ISO particle count is a measure of the number of particles greater than 4, 6, and 14 microns in every milliliter of fluid. The number of particles is then converted to what is referred to as the ISO Code or Range Code. The range code represents the number of particles of a given size in one milliliter of sample. Results from an oil cleanliness testing are typically reported in a three number format such as 18/16/13, where 18 represents the range code representing the number of particles that are 4 microns and larger, 16 the range of particles that are 6 microns and larger, and 13 represents particles 14 microns and larger.
How Can we Measure How Much Particle Contamination is in an oil?
Particle contamination is measured using the ISO 4406 (c) standard. The ISO 4406 (c) standard gives a range code corresponding to the number of particles per milliliter in three difference size ranges:
particles > 4 micron
particles > 6 micron
particles >14 micron
A Cleanliness Code is great, but why do these numbers really matter? Won’t the contaminant be visible in the oil?
The reality is that 4, 6 and 14 micron particles simply cannot be seen with the naked eye. In fact, it’s not until particles get as large as 40-50 microns that we can see them without a microscope. By the time you can see contaminants in your oil, the oil cleanliness has well exceeded what the oil laboratories particle counter can count. This effectively means your oil is not meeting standards and is TOO DIRTY.
How Clean Should Your Oil Be? Set Your Targets.
